|
Model K Mark II Series |
The Model K MKII Series is the perfect pantograph system for machining most types of materials from plastic to tool steels. In addition to an unobstructed view of the cutter and work piece, all hand wheels are graduated, clearly marked and easy to read. The primary drive and motor are fully enclosed in the column to prevent fouling. Cutter frame linkage pivots are fitted with taper bearings for trouble free operation and all slideways are protected from swarf.
|
Model K |
Specifications | |||||
|
Worktable |
20" x 14" (508mm x 356mm) 7 tee slots 3/8" x 20" (9.5mm x 508mm) On 17/8" (47.66mm) Pitch |
|||||
| Motion | Calibrated in | Travel | Hand wheel Graduation | |||
| Vertical | Metric | 280mm | 0.02mm | |||
| Imperial | 11" | 0.001" | ||||
| Transverse | Metric | 254mm | 0.02mm | |||
| Imperial | 10" | 0.001" | ||||
| Longitudinal | Metric | 254mm | 0.02mm | |||
| Imperial | 10" | 0.001" | ||||
|
8 Cutter Speeds (rev/min) |
3,000/4,000/5,000/6,000/9,000/12,000/15,000/18,000 | |||||
|
Cutter Feed |
Full screw feed of 1/2" (12.7mm) | |||||
| Cutters |
Newing-Hall Taper shank cutters and parallel shank cutters, maximum diameter 3/8" (10mm) |
|||||
| Cutter Spindle |
Type 'L' with collets for parallel shank cutters and adaptor for taper shank cutters. Maximum capacity 3/8" (10mm) or type 'K' for taper shank cutters only |
|||||
| Work Capacity | Measurements made with the cutter at the centre of its sweep at all reductions. | |||||
| Throat Depth |
Worktable fully raised
|
161/2" (419mm)
|
||||
|
Worktable fully lowered
|
141/2" (368mm)
|
|||||
|
Pantograph at 6:1, head extended, table raised
|
191/2" (495mm) | |||||
| Distance from spindle nose to worktable | maximum (worktable fully lowered) | 11" (280mm) | ||||
| minimum (worktable fully raised) | Nil | |||||
| Throat depth with deep throat unit fitted | at 1:1 | 33" (838mm) | ||||
| at 6:1 | 24" (609mm) | |||||